Raymarine C140w User Reference Handbook

Also see for C-Series: Installation and operation instructions Installation and operation instructions Installation instructions Installation instructions Operating guide

Contents

Raymarine C140w User Reference Handbook Manual pdf 84 page image

6.14 Measuring distances and bearingsYou can use the databar information and the ruler to measuredistances in the chart application.You can determine the distance and bearing :• from your boat to the position of the cursor;• between two points on the chart.Positioning the chart rulerIn the chart application:1. Using the trackpad, position the cursor at the start point of yourmeasurement or bearing.2. Press the DATA button.3. Press the RULER softkey.4. Using the trackpad, position the cursor at the end point of yourmeasurement or bearing. The range and bearing is displayed.5. Press the OK button to fix the new ruler position.Repositioning the chart rulerIn the chart application, with the ruler displayed:1. Press the ADJUST A or ADJUST B softkey to select the startor end point, as appropriate.2. Using the trackpad, move the cursor to the new ruler position.3. Press the OK button to fix the new ruler position.Clearing the chart rulerIn the chart application:1. Press the DATA button.2. Press the RULER softkey.3. Press the CLEAR RULER softkey.84 C-Series Widescreen user reference