Selecting a fishfinder presetFrom the fishfinder main screen:1. Press the appropriate softkey to select from:• PRESET 1 SINGLE,• PRESET 2 DUAL,• PRESET 3 SHALLOW or• PRESET 4 DEEPAfter a few moments, the fishfinder display will change to the newmode. This is indicated in the top left-hand corner of the status bar.12.4 Fishfinder display modesSelecting a fishfinder display modeWhen a fishfinder preset is selected, its softkey label changes toADJUST. Pressing this softkey allows you to configure the displaymode settings to suit your requirements. (Changes to the displaymode are saved with the preset at power-off.)From the fishfinder main screen:1. Use the softkeys to select an appropriate preset.The softkey name changes to ADJUST...2. Select the ADJUST... softkey.3. With dual frequency screens select FREQ1 or FREQ2 to selectwhich frequency display you wish to change.4. Select the SELECT VIEW softkey.5. Select the required display mode:• None,• Zoom,• Bottom Lock or• A-Scope.Fishfinder zoom modeThe zoom display mode magnifies a region of the fishfinder screento display more detail.This zoom option enables you to:• Replace the standard fishfinder image with the zoomed image,or display the zoomed image alongside the standard fishfinderimage.• Set the zoom factor to a predefined level, or adjust it manually.168 E-Series Widescreen User reference
