Chapter 3: Adjusting SmartPilot Settings 47Dealer Calibration screens and settingsThe items in Dealer Calibration vary according to the vessel type you haveselected. See the table onpage 57 for default values.SeaTrial Calibration lockThis screen controls whether it is possible to access Seatrial Calibration.Vessel typeVessel type should be set when commissioning the SmartPilot (seepage 23 ).Notes: (1)When you select the vessel type, the SmartPilot will set appropriate de-faults for several other calibration settings. Refer to the table on page 57for default values.(2)The vessel type options will normally give optimum performance for typicalvessels of each type. However, you may find you can improve theperformance of your vessel by selecting an option for a different vesseltype.OptionsCAL LOCK OFF Calibration lock off – Seatrial calibration can be accessed(default)CAL LOCK ON Calibration lock on – Seatrial calibration cannot beaccessedOptionsDISPLACE Power-driven boats which do not plane(Typically below 15 kts top speed)SEMI DISPLACE Faster power-driven boats which do not plane(Typically 15-20 kts top speed)PLANING Planing boats with inboard engine(s) and shaft drives(NOT boats with outdrives)STERN DRV Boats with outdrives or outboard engines, including Mer-cury Verado and Volvo Penta IPS.WORK BOAT Commercial tugs, fishing vessels, etcSAIL BOAT Sailing boat
