Raymarine SmartPilot X-5R Drive Installation & Setup

Contents

Raymarine SmartPilot X-5R Drive Installation & Setup Manual pdf 62 page image

54 SmartPilot X-5R Drive Installation and Setup Guide4.4 Dealer calibrationFor information on how to access Dealer calibration, refer to Accessing theCalibration modes on page 50.Some Dealer calibration values are adjusted during the commissioning process (seeSection Chapter 3: Commissioning & Setup), and once the SPX-5R Drive system hasbeen commissioned, you should not normally need to change Dealer calibrationvalues.However if you decide you want to change values in Dealer calibration, be aware thatthe Dealer calibration mode includes items that have a significant impact on SPX-5Drive system operation and can affect your boat’s safety.Seatrial calibration lockThis screen controls the access to Seatrial calibration.Screen Text OptionsRESPONSE Range = 1 to 9Levels 1 to 3 minimize the amount of pilot activity. This conservespower, but may compromise short-term course-keeping accuracy.Levels 4 to 6 should give good course keeping with crisp, well con-trolled turns under normal operating conditionsLevels 7 to 9 give the tightest course keeping and greatest rudderactivity (and power consumption). This can lead to a rough passagein open waters as the SPX-5R Drive system may ‘fight’ the sea.WARNING: Dealer calibrationChanging the Dealer calibration values can have a significantaffect on the SPX-5R Drive system steering characteristics andtherefore on the safety of your boat.Screen text OptionsCAL LOCK OFF Calibration lock off – Seatrial calibration can be accessed (default)CAL LOCK ON Calibration lock on – Seatrial calibration cannot be accessed