Razor E90 Series Owner's Manual

Contents

Razor E90 Series Owner's Manual Manual pdf 3 page image

Remove contents from box. Remove the foam separators that protect the components from damage duringshipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may haveoccurred during shipping. Because the scooter was 95 percent assembled and packed at the factory, thereshould not be any problems, even if the box has a few scars or dents.MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANYMAINTENANCE PROCEDURES.Estimated Assembly and Set-Up TimeRazor recommends assembly by an adult with experience in bicycle mechanics.Allow up to 10 minutes for assembly, not including initial charge time.Allow up to 12 hours for charge (see page 3 for charging information).BEFORE YOU BEGIN2WARNING:DO NOT USE NON-RAZOR PRODUCTSWITH YOUR RAZORELECTRIC SCOOTER.The scooter has been builtto certain Razor designspecifications. The originalequipment supplied at the timeof sale was selected on thebasis of its compatibility withthe frame, fork and all otherparts. Certain aftermarketproducts may not be compatibleand will void the warranty.Required ToolsNeed Help? Visit our web site for replacement parts, product support and a list of authorized service centersat www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have theproduct I.D. code located on the white label on your product or back of charger available for better assistance.5mm Allen wrenches(Included)BrakePush Button ThrottleHandlebarStemOn/Off SwitchCharger Port- Battery- Control ModuleLimiterCharger(Note: Charger design may varyfrom one shown)ChargerPlugChargerPort10mm and 13mm openwrenches(Not included)Screwdriver(Not included)MotorNote: Electric scooter mustbe moving at 3mph/5kmhwhile pressing the pushbutton throttle to engagemotor.Product ID Locations:See locations to the left1. Stem2. Underneath battery tray3. Charger4. Box - side of UPC (not shown)1.2.3.