Razor E90 Series Owner's Manual
           | |
❑ Chain and Rear Wheel ReplacementTools required: Phillips screwdriver, 10mm open wrench and two (2) 13mm open wrenches.1 With a Phillips screwdriver,loosen the two screws andremove the chain guard.2 Using two 13mm openwrenches, loosen the locknutsby turning the wrenches counterclockwise.3 To loosen the chain, push thechain tensioner down to createsome slack in the chain.54 Remove wheel and installreplacement wheel.(Note the sequence of thehardware)REPAIR AND MAINTENANCE5 Push the chain tensionerdown to install the chain onboth sprockets.6 With two 13mm openwrenches, re-tighten thelocknuts.Note: Rear wheel hardwaresequenceLeft Side22-1 13mm nut22-2 Split washer22-3 Flat washerFrame22-4 Long spacerRight Side22-1 13mm nut22-2 Split washer22-3 Flat washerFrame22-5 Short spacer7 Re-attach the chain guard.1 Using two (2) 5mm Allenwrenches, loosen the axle bolt.Remove wheel and installreplacement wheel. (Note thesequence of the hardware)❑ Front Wheel ReplacementTools required: Two (2) 5mm Allen wrenches.Right Side11-4 - Center spacer11-3 - Bearing11-2 - SpacerFork11-1 - 5mm coupling boltLeft Side11-3 - Bearing11-2 - SpacerFork11-5 - 5mm coupling screwNote: Front wheel hardwaresequence |
Related manuals for Razor Accelerator Series
Razor A Series Owner's Manual
Razor E90 Owner's Manual
Razor E300 Series Owner's Manual
Razor E300 Series Owner's Manual
Razor E100 series Owner's Manual
Razor E300 Series Owner's Manual
Razor E200 Series Owner's Manual
Razor E100 Series Owner's Manual
Razor E200 Series Owner's Manual
Razor Pro Series Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine