Razor E90 Series Owner's Manual

Contents

Razor E90 Series Owner's Manual Manual pdf 5 page image

4CONNECTORS/HARDWARE MAINTENANCENeed Help? Visit our web site for replacement parts, product support and a list of authorized service centersat www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have theproduct I.D. code located on the white label on your product or back of charger available for better assistance.Safety GearAlways wear proper protective gear such as an approved safetyhelmet. Elbow pads and kneepads are recommended. Alwayswear athletic shoes (lace-up shoes with rubber soles), never ridebarefooted or in sandals, and keep shoelaces tied and out of theway of the wheels, motor and drive system.BatteryMake sure the power switch is turned off whenever the scooter isnot in use. Never store the product in freezing or below freezingtemperatures! Freezing will permanently damage the battery.Failure to recharge the battery at least once a month may result ina battery that will no longer accept a charge.BrakeCheck the brakes for proper function. When you step on the brake,the brake should provide positive braking action. When you applythe brake with the speed control on, the brake cut-off switchshould cut power to the motor.Frame, Fork and HandlebarsCheck for cracks or broken connections. Although broken framesare rare, it is possible for an aggressive rider to run into a curbor wall and wreck and bend or break a frame. Get in the habit ofinspecting your scooter on a regular basis.WheelsPeriodically inspect the tires for excess wear and regularly checkthe wheels.❑❑❑❑❑Do not use this product for the first time until you havecharged the battery for at least 12 hours. Failure to followthese instructions may damage your product and void yourwarranty.❑ Starting the ScooterUSAGETo start unit, turn on power switch, press the push button throttle(A) and kick start up to 3mph (5mh) (B).❑ Stopping the ScooterTo stop unit, release the push button throttle (A) and step down onthe rear fender brake (B) until the unit comes to a complete stop.Note: Electric scooter mustbe moving at 3mph/5kmhwhile pressing the pushbutton throttle to engagemotor.