Razor POWER A 2 Owner's Manual

Also see for POWER A 2: Owner's manual Owner's manual Owner's manual Owner's manual Quick start guide

Contents

Razor POWER A 2 Owner's Manual Manual pdf 5 page image

3Need H elp? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact informationat www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Servicecontact information is listed at the back of this manual.BEFORE YOU BEGINRequired Tool5 mmAllen WrenchWARNING: DO NOT USENON-RAZOR PRODUCTS WITHYOUR SCOOTER.Razor scooters have been built tocertain Razor design specifications.The original equipment supplied atthe time of sale was selected onthe basis of its compatibility withthe frame, fork and all other parts.Certain aftermarket products maynot be compatible and will void thewarranty.Product ID Locations:(See locations to the left)1. Underneath Product2. Charger3. UPC Side of Box (Not Shown)Box Contents:• Power A2• Charger• Owner’s Manual• Allen WrenchRemove contents from box. Remove the separators that protect the components from damage during shipping. Inspectthe contents of the box for scratches in the paint, dents that may have occurred during shipping. Because your scooterwas assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY ASSEMBLY ORMAINTENANCE PROCEDURES.Estimated Assembly and Set-Up TimeAllow up to 5 minutes for assembly, not including initial charge time.Allow up to 4 hours for charge (see page 6 for charging information).2.Charger(Note: Charger design mayvary from one shown)ThrottleQuick-Release LeverCollar ClampAnti-Rattle Folding Mechanism Power Cutoff Fender BrakeHub MotorCharger PortON/OFF ButtonKickstand1. Product IDNote: Electric scooter mustbe moving at least 3 mph (5 km/h)while applying throttle toengage motor.