Razor POWER A 2 Owner's Manual

Also see for POWER A 2: Owner's manual Owner's manual Owner's manual Owner's manual Quick start guide

Contents

Razor POWER A 2 Owner's Manual Manual pdf 6 page image

Note: Remove plastic covers on rear axle boltbefore unfolding scooter.4ASSEMBLY AND SET-UPWARNING:Keep fingers clear of the pivotingmechanism when folding orunfolding the scooter. Make sureothers are standing clear.Unfolding the Scooter for First Time Use2 Turn knob clockwise to tighten and engage theAnti-Rattle mechanism.Note: To activate the Anti-Rattle feature, turn the knob clockwise. Note there is no need to overtighten.To fold, loosen the Anti-Rattle knob (by turning knob counterclockwise) prior to pulling up theAnti-Rattle knob to release the folding mechanism. For instructions on folding see page 8.1 To release the folding mechanism, placethe scooter on the ground. Pull the Anti-Rattleknob up to raise T-bar. Turn knob completelycounterclockwise then continuing raising T-baruntil T-bar is locked in the upright position.Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact informationat www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Servicecontact information is listed at the back of this manual.