Razor POWER A 2 Owner's Manual

Also see for POWER A 2: Owner's manual Owner's manual Owner's manual Owner's manual Quick start guide

Contents

Razor POWER A 2 Owner's Manual Manual pdf 9 page image

7Need H elp? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact informationat www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Servicecontact information is listed at the back of this manual.USAGEHow to RideDo not activate the thumb throttle unless you are on the Power A2 and in a safe, outdoor environment suitable for riding.Put kickstand up.Press the power button (A), the LED will light up.Get on the scooter and place both hands on the handlebars. Kick to start (B), and then push the thumb throttle (C).How to StopFor controlled stops, release the throttle and apply the brake by putting pressure on the rear-fender brake. Razorrecommends that you practice applying the brake at various speeds and in an open area free from obstructions beforeriding your scooter around others.ABNote: Practice riding only in wideopen areas clear from curbs,parking blocks and other obstacles.Impacting the wheels againstany hard surface can damage thewheels. Wheels are not coveredunder the limited warranty.Note: Electric scooter must bemoving at least 3 mph (5 km/h)while engaging throttle toengage motor.CNote: As an additional safetyfeature, the scooter is designed tocut power to the motor when brakeis applied.Note: Motor will re-engage,(without having to kick to start),if brake is released and throttle isapplied before scooter has sloweddown to under 3 mph (5 km/h).