R E D D S M C P O W E R O P E R AT I O N G U I D ECOPYRIGHT © 2014 RED.COM, INC 955-0038, REV-F | 21DSMC ADAPTOR OPERATIONSThis section describes the installation and removal of DSMC module adaptors.INSTALL THE +1 ADAPTOR MODULEREQUIRED TOOL: T20 Torx driver1. Turn off the BRAIN.2. Remove the REDMOTE, if attached.3. Position the +1 Adaptor Module over the V-mount on the rear of the BRAIN.4. Insert the HDMI connector into the HDMI port on the BRAIN.Install the +1 ModuleAdaptorInsert the HDMIConnector to theBRAIN
