Red Epic DSMC Operation Manual
Also see for DSMC MEDIA: Operation guide
                                                              | |
Contents
| 
R E D D S M C P O W E R O P E R AT I O N G U I D ECOPYRIGHT © 2014 RED.COM, INC 955-0038, REV-F | 33QUICKPLATE MODULEThe Quickplate Module attaches to a +1 Adaptor Module or Module Adaptor to provide RED BRICK power sup-port for the DSMC BRAIN. Unlike the Backpack Quickplate, the Quickplate Module does not require a LEMOconnector cable or Backpack Baseplate. Use a battery-equipped DSMC Side Handle or an AC Power Adaptor(DSMC) to keep the camera running while hot swapping batteries.The Quickplate Module also provides two (2) auxiliary ports to provide power for camera accessories. AUX portsdraw power from an attached RED BRICK if one (1) is attached. If a RED BRICK is not attached, ports drawpower from the BRAIN through the SEARAY connector.NOTE: The Quickplate Module requires DSMC firmware v5.1.14 or later.QUICKPLATE MODULE CONNECTORSThe Quickplate Module is designed with two (2) industry-standard 2-pin 0B AUX ports to power camera ac-cessories when shooting. The two (2) auxiliary connectors provide a maximum combined output of 3.8 A. Forexample, if one (1) port is drawing 2 A, the other can provide up to 1.8 A.NOTE: Align the key and red mark on the AUX port with the key on the cable connector to connect.122-PIN 0B LEMO AUX CONNECTORS1PIN SIGNAL1 Ground2 +12 VDC1. Mating connector: EEG.0B.302.CLLQuickplate ModuleQuickplate ModuleAUX Connector |
Related manuals for Red Epic DSMC MEDIA
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine