Red Epic DSMC Operation Manual
Also see for DSMC MEDIA: Operation guide
                                                              | |
Contents
| 
R E D D S M C P O W E R O P E R AT I O N G U I D ECOPYRIGHT © 2014 RED.COM, INC 955-0038, REV-F | 43REDVOLT CHARGER (QUAD)The REDVOLT Charger (Quad) is the fastest way to charge up to four REDVOLT or two REDVOLT XL batteries.All batteries charge simultaneously, with up to 1.75 A distributed evenly to each cell until fully charged. TheREDVOLT Charger (Quad) can charge multiple REDVOLT or REDVOLT XL batteries in two (2) hours or less.NOTE: The REDVOLT Charger (Quad) stops charging automatically if battery temperature exceeds 40˚C (104˚F),or drops below 0°C (32°F).REDVOLT CHARGER (QUAD) LED INDICATORSThe light on the REDVOLT Travel Charger displays a specific color and pattern indicating the state of charge.COLOR PATTERN DESCRIPTIONGreen Charger on, battery fully chargedRed/Green flashing (alternating) Charger on, fail conditionAmber flashing Charger on, battery connected and chargingRECHARGE REDVOLT BATTERIES1. Connect the REDVOLT Charger (Quad) to a 100–240 VAC, 50/60 Hz power outlet.2. Insert REDVOLT or REDVOLT XL battery into the charging bay.3. Apply pressure until you hear a click to ensure the battery is fully seated.4. Charge the battery until the LED indicator turns green, signalling a fully charged battery.5. Press the Eject button on the desired battery charging bay(s) and remove the battery.‒ REDVOLT: Press the Eject button to eject the battery.‒ REDVOLT XL: Press both Eject buttons to eject the battery.REDVOLT Charger (Quad) |
Related manuals for Red Epic DSMC MEDIA
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine