Appendix B. Fence Device Parameters80Field DescriptionPasswordScript(optional)The script that supplies a password for access to the fence device. Using thissupersedes the Password parameter.Domain Domain of the Bull PAP system to power cycle.Table B.3. Bull PAP (Platform Administration Processor)Field DescriptionName The name assigned to the DRAC.IP Address The IP address assigned to the DRAC.Login The login name used to access the DRAC.Password The password used to authenticate the connection to the DRAC.Module name (optional) The module name for the DRAC when you have multiple DRAC modules.PasswordScript(optional)The script that supplies a password for access to the fence device. Using thissupersedes the Password parameter.Use SSH(DRAC5 only)(Rhel 5.4 and later) Indicates that system will use SSH to access the device.Table B.4. Dell DRACField DescriptionName A name for the BladeFrame device connected to the cluster.CServer The hostname (and optionally the username in the form of username@hostname)assigned to the device. Refer to the fence_egenera(8) man page for moreinformation.ESH Path(optional)The path to the esh command on the cserver (default is /opt/pan- mgr/bin/esh)lpan The logical process area network (LPAN) of the device.pserver The processing blade (pserver) name of the device.Table B.5. Egenera SAN ControllerField DescriptionName A name for the RSB to use as a fence device.Hostname The hostname assigned to the device.Login The login name used to access the device.Password The password used to authenticate the connection to the device.PasswordScript(optional)The script that supplies a password for access to the fence device. Using thissupersedes the Password parameter.Table B.6. Fujitsu Siemens Remoteview Service Board (RSB)Field DescriptionName A name for the GNBD device used to fence the cluster. Note that the GFS servermust be accessed via GNBD for cluster node fencing support.
