Anaconda content errors55| || |+--------------------------------------------------------------+You can check the following items:1. Verify httpd is running on your RHN Satellite2. Verify cobblerd is running3. Verify you can fetch the above file using wget from a different host. For example:wget http://satellite.example.com/cblr/svc/op/ks/profile/rhel5-i386-u3:1:Example-Org4. run cobbler check from the CLI. You should see only this output:# cobbler checkThe following potential problems were detected:#0: reposync is not installed, need for cobbler reposync, install/upgrade yum-utils?#1: yumdownloader is not installed, needed for cobbler repo add with --rpm-list parameter,install/upgrade yum-utils?#2: The default password used by the sample templates for newly installed machines(default_password_crypted in /etc/cobbler/settings) is still set to 'cobbler' and shouldbe changed#3: fencing tools were not found, and are required to use the (optional) power managementfeatures. install cman to use themIf you see complaints about problems with httpd, cobblerd, or others, you must resolve thoseissues.NoteIn the case of a system reprovision, check the following URL:http://sat_FQDN/cblr/svc/op/ks/system/$system_name:$org_idIn the case of a guest reprovision you can optionally check the following URL:http://sat_FQDN/cblr/svc/op/ks/system/$system_name:$org_id:$guest_name5.10.3. Anaconda content errors+------------------+ Package Installation +------------------+| |+-------------------------+ Error +--------------------------+| || The file chkconfig-1.3.30.1-2.i386.rpm cannot be opened. || This is due to a missing file, a corrupt package or || corrupt media. Please verify your installation source. || || If you exit, your system will be left in an inconsistent || state that will likely require reinstallation. || |