RedMax BHT250PD60 Workshop Manual

6.6.2 To assemble the battery connectorCAUTION: The pin in the connector of the wireis loose and can fall out.1. Push the communication cable connector into theplastic housing, if the battery connector has acommunication cable.ACAUTION: Make sure the pin in thecommunication cable connector is in thecorrect position (A). The product cannotsend information to the common servicetool, if the pin is missing or in the incorrectposition.2. Put the battery connector with the red wire into thepositive side of the plastic housing. Align the holesfor the pins.3. Put the battery connector with the black wire into thenegative side of the plastic housing. Align the holesfor the pins.4. Push the pins into the holes through the housing andthe connectors.CAUTION: Make sure that the holes in theconnections align with the holes in thehousing before you push in the pins.580 - 001 - 27.03.2018 Troubleshooting - 25