RedMax CHTZ2401 Owner's/operator's Manual
Also see for CHTZ2401: Owner's/operator's manual
                                                      | |
307. OperationEnglishHEDGE TRIMMING TECHNIQUESTrim sides of a hedge first, and then the top.Vertical cut:• With the single-sided blade hedge-trimmer, modelHTZ2401 always cut from the bottom up (OP9).• With the 2-sided blade model CHTZ2401 use anarcing cut from the bottom upwards, thendownwards to use both sides of the blades (OP10).Horizontal cut:• In order to get the best cutting results, slightly tilt theblade (5÷10°) towards the cutting direction (OP11,OP12).Cut slowly, specially with thick hedges.Always follow the safety precautions.The hedge-trimmer must only be used to trimhedges or small bushes. It is forbidden to cut othertypes of material. Do not use the hedge-trimmer asa lever to lift, move or break objects, nor lock it onfixed supports. It is forbidden to apply tools orapplications that are not the ones indicated by themanufacturer onto the hedge-trimmer’s powertake-off. Do not use it for pruning trees or cuttinggrass.WARNINGOP9OP11OP12OP10 |
Related manuals for RedMax CHTZ2401
RedMax CHTZ2401-CA Owner's/operator's Manual
RedMax CHTZ2400 Owner's/operator's Manual
RedMax CHTZ2460 Owner's/operator's Manual
RedMax SRTZ2401 Owner's/operator's Manual
RedMax LRTZ2401 Owner's/operator's Manual
RedMax CHTZ2500 Owner's/operator's Manual
RedMax CHTZ2500 Owner's/operator's Manual
RedMax LRTZ2401-CA Owner's/operator's Manual
RedMax CHT2301 Owner's/operator's Manual
RedMax CHT2301 Owner's/operator's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine