Reer SAFEGATE S Installation, Use And Maintenance Manual

Also see for SAFEGATE S: Quick installation guide

Contents

Reer SAFEGATE S Installation, Use And Maintenance Manual Manual pdf 84 page image

REER S.p.A. - 32 via Carcano - 10153 Torino Italia Internet: www.reer.it - e-mail: info@reer.it848541150 - rev.1 - 10/07/2017Configuration softwareSAFEGATE DIAGNOSTIC - ERRORSERROR FAILURE DESCRIPTION ACTION0 ÷ 25 Internal error Return the barrier to ReeR to be repaired3435, 3740, 4749, 50OSSD error Verify connection of pins 3, 4 on the main RECEIVER connector32, 33, 36,38, 39, 4142, 43, 4445, 46, 48, 51OSSD Internal error Return the barrier to ReeR to be repaired64 ÷ 73 Main board Internal error Return the barrier to ReeR to be repaired74, 75 Overcurrent on 24VDC Verify max current consumption < 1,6A76 ÷ 8590 Main board Internal error Return the barrier to ReeR to be repaired86, 87 STATUS out error Verify connection of pin 12 on the main RECEIVER connector88 Overcurrent on auxiliary LAMP Verify connection of pin 1 on the RECEIVER LAMP/USB connector89 See 86, 87, 88 See 86, 87, 88105, 106 Interfering Emitter detected¾ Switch the position of the Emitter and Receiver¾ Move the interfering Emitter to avoid this illuminating the Receiver¾ Shield the beams coming from the interfering Emitter using opaqueprotections128 Configuration error Verify connection of pins 6, 11 on the main RECEIVER connector129 Initial configuration modified Verify connection of pins 6, 11 on the main RECEIVER connector130 See 128, 129 See 128, 129131, 132 With EDM active, initial PIN 8 status wrong Verify connection of pin 8 on the main RECEIVER connector133 Stucked EDM contact (closed) Verify external contacts134 Open EDM contact Verify external contacts135 See 133, 134 See 133, 134136 OVERRIDE configuration error Verify connection of pins 9, 10 on the main RECEIVER connector137 Exceeded max number of Override requests Turn off and on SAFEGATE138 See 137 See 137139 24VDC on STATUS output Verify connection of pin 12 on the main RECEIVER connector140 Overcurrent on STATUS output Verify connection of pin 12 on the main RECEIVER connector141 See 139, 140 See 139, 140142 Error on Integrated lamp Return the barrier to ReeR to be repaired143, 144 Error on Auxiliary lamp Verify connection of pin 1 on the RECEIVER LAMP/USB connector146, 147 Muting sensors configuration error¾ Verify muting sensors connection¾ Verify position of sensor 2 with the software¾ If no error is detected, return the barrier to ReeR to be repaired

/ 87

Related manuals for Reer SAFEGATE S