Regency Energy E18E Owners & Installation Manual

Contents

Regency® E18E Gas Fireplace Insert | 4949|installation919-216c 11.28.172E18MONTIGO 28 F3 ONLY12. To install fi ller piece, slide under faceplate and secure tobackside of faceplate with magnets.13. Completed install of filler piece.10. Locate the 'DC supply' wire on the wiring harness, the wirewill be clearly marked. Attach the AC adaptor to the DCsupply wire as shown. Do not plug into a 120V circuit untilthe install is complete.DC supply wire from wiring harnessAC adaptor11. Install control cover, adjust horizontal alignment by slidingcontrol cover to ensure even spacing on both sides. Ensurecontrol cover is seated down all the way.Diagram 13.7DRAFT RELIEF OPENINGS MUST NOT BE COVERED OR BLOCKED.Diagram 13.6Diagram 13.58. Attach front faceplate with 4 screws (2 on each mountingbracket). (Touch up screws with black paint, after install.)9. Reinstall glass door and screen removed from step 1.