Regency Energy E18E Owners & Installation Manual

Contents

74 | Regency® E18E Gas Fireplace Insert|74maintenanceLOG REPLACEMENTThe unit should never be used with broken logs.Turnoff the gas valve and allow the unit to cool beforeopening door to carefully remove the logs. The pilotlight generates enough heat to burn someone. Iffor any reason a log should need replacement, youmust use the proper replacement log. The positionof these logs must be as shown in the diagramunder Log Installation.NOTE: Improper positioning of logs may createcarbon build-up and will alter the unit’sperformance which is not covered underwarranty.GLASS GASKETIf the glass gasket requires replacement use Part# 936-155 to order new gasket.DOOR GLASSYour Regency ® fireplace is supplied with hightemperature 5mm-Ceramic glass. If your glassrequires cleaning, we recommend using anapproved glass cleaner available at all authorizeddealers. Do not use abrasive materials.CAUTION & WARNINGS:* Do not clean when the glass is hot.* The use of substitute glass will void allproduct warranties.* Care must be taken to avoid breakage ofthe glass.* Do not strike or abuse the glass.* Do not operate this fireplace without theglass front or with a cracked or brokenglass front.* Wear gloves when removing damaged orbroken glass.* Replacement of the glass panels should bedone by a licensed or qualified service person.GLASS REPLACEMENTIn the event that you break your glass by impact,purchase your replacement from an authorizedRegency dealer only. Replacement glass (Part#616-518/P) is shipped already installed into thedoor frame. Reinstall as per Glass Door Installationin the "Glass Door Removal" section.CAUTION: ANY SAFETY SCREEN ORGUARD REMOVED FOR SERVICING ANAPPLIANCE MUST BE REPLACED PRIORTO OPERATING THE APPLIANCE.CLOTHING OR OTHER FLAMMABLEMATERIAL SHOULD NOT BE PLACEDON OR NEAR THE APPLIANCE.