Regency HZ42STE-NG10 Owners & Installation Manual

Also see for HZ42STE: Owners & installation manual

Contents

Regency Horizon™ HZ42STE-10 Gas Fireplace | 1717|installationOPTIONAL FRAMING KIT919-505 02.13.151HZ42STE58"- Vertical Vent54"- Horizontal Vent42"Horizontal Exit VentInstallation Only:Use inner holeson top horizon-tal studs–cut offexcess from eachend before securingframe to the wallCut hereAn optional framing kit is available for the HZ42STE.Note: There are different configurations for horizontal exit venting vs verticalexit venting and options in the framing width to accommodate various thick-nesses of fi nishing materials.Determine your installation prior to assembly of this frame kit.Prior to assembling the framing kit, determine the overall thickness of thenon combustible material plus fi nishing material. Framing must be 20 inchesminus the overall non combustible/finishing material.Example= 2 inches of finishing material per side = 16 inches framing width.1. Assemble the 2 (two) vertical ends (V) of the framing kit by securing hori-zontal studs (H) with 4 (four) screws securing each stud–two on each side.The horizontal studs (H) are adjustable in 1/2" increments to accommodatefi nishing materials - determine the thickness of the fi nishing materials beforesecuring the horizontal studs (H)..3. If installing the unit with horizontal venting–secure the 2 (two) top horizontalstuds using the inner holes–cut the remainder of the stud (repeat at otherend) before proceeding to Step 3.OPTIONAL FRAMING KIT2 Install the 2 long horizontal studs, secure with 2 screws on each end - ifinstalling with horizontal vent exit see Step 4 before installing.4. Install 2 top horizontal studs with 2 screws on each side.V VHHVVHHHCross Center Horizontalstuds are adjustable in1/2" increments.Vertical Side20" minus 2Xfi nishing material Vertical ExitVent Install–usethese holes (onboth sides)58"- Vertical Vent54"- Horizontal Vent42"Horizontal StudsH