Regency P121-NG Owners & Installation Manual

Regency ® P121/P121LC/P121RC/P131 Zero Clearance Room Sealed Gas Fireplace 25INSTALLATIONLOG INSTALLATIONRead the instructions below carefully and refer to the diagrams. Iflogs are broken do not use the unit until they are replaced. Brokenlogs can interfere with the pilot operation.Log Kit # 360-930 contains the following pieces:a) 326 Front Right Logb) 327 Front Left Logc) 328 Middle Right Logd) 329 Middle Left Loge) Embers 902-154Please note that there are 2 of each log. This logset is mirrored front and back.326Push back side of the left end of the log upagainst the tab on the burner.326326327Grate Post1) Carefully remove the logs from the box and unwrap them. The logsare fragile, handle with care - do not force into position.2) Place Log 326 on the front right side of the burner. Ensure that thenotches on the far right side of the log fit into the grate posts. Push backside of the left end of the log up against the tab on the burner.Repeat step 2 on the opposite side of the burner.Tab on Burner3) Place Log 327 on the front left side of the burner. Position the rightend of the log in between the two tabs and the left end of the log intothe grate post.328327 329 326The image below shows all of the logs in place.326 329328 327The 3-digit numbers (ie. 327) aremolded into the rear of each log.326327329 328