Regency P33S-NG Owners & Installation Manual

Regency P33S-NG Owners & Installation Manual Manual pdf 29 page image

Regency P33 Sunrise TM Gas Fireplace 29INSTALLATIONEach Kit contains one ULPGConversion Kit # 434-971LPG Conversion Kit Contains:Qty. Part # Description1 904-557 #57 Injector1 918-273 Red "ULPG" label1 904-529 5/32" Allen Key1 910-037 ULPG Injector(Pilot Orifi ce)1 918-805 Instruction SheetTHIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTERIF IN DOUBT DO NOT DO THIS CONVERSION !!Installation of the ULPGConversion Kit:1) Shut off the gas supply.2) a) Remove the Faceplate by lifting it offof the flush doorb) Remove the fl ush door.c) Remove the Cobalt Glass Crystals orCeramic Stones. Also removeStainless Steel Panels if installed.See handling instructions in manualprior to removal.d) Remove the 2 screws holding theBurner Assembly to the firebox base.Lift out the burner assembly.(See Diagrams 1 & 2)5) Unscrew the pilot orifice with the Allenkey and replace with the LPG pilot orificein the kit and replace pilot cap.(See Diagram 5)6) Remove burner orifice with a 13mm(1/2") wrench and discard. Use anotherwrench to hold on to the elbow belowthe orifice. (See Diagram 6)Burner Orifice7) Reinstall new burner orifi ce LPGstamped # and tighten.3) With Burner Assembly removed, lift outfi rebox base. (See Diagram 3)4) Pull off the pilot cap to expose the pilotorifi ce. (Diagram 4)Diagram 1Diagram 2Diagram 3 Firebox baseDiagram 4 Pilot CapPilot OrificeDiagram 5Diagram 6CONVERSION FROM NG TO ULPGFor P33 Sunrise™INSTALLATION