Regency P42-LP3 Owners & Installation Manual

Regency P42-LP3 Owners & Installation Manual Manual pdf 17 page image

Regency P42-3 Zero Clearance Direct Vent Gas Fireplace 17Flex LinerExhaustFlueA maximumof two certifiedjoiner kitsmay be usedper length.#948-305 (35 ft)Air IntakeCo-linear DVVertical TerminationCap # 946-529Co-LinearFlexAdapterwith Kit#946-563OuterPipewith Kit#946-563Inner PipeAdapterwith Kit#946-563Rigid Pipe Adaptor# 510-994 90 DegreeElbowPipe LengthINSTALLATIONVERTICAL TERMINATIONWITH CO-LINEAR FLEX SYSTEMTHE APPLIANCE MUST NOT BECONNECTED TO A CHIMNEY FLUESERVING A SEPARATE SOLID FUELBURNING APPLIANCE.This appliance is designed to be attached to two3" (76mm) co-linear aluminium flex running thefull length of the chimney. See the VentingArrangements on next page for minimum andmaximum heights.Masonry chimneys may take various contours which the flexible liner will accommodate.However, keep the flexible liner as straight as possible, avoid unnecessary bending.The Air Intake pipe must be attached to the inlet air collar of the termination cap.Required Parts:Part # Description946-529 Co-linear DV VerticalTermination Cap948-305 3" Flex - 35 ft.946-563 Co-Axial to Co-Linear Adapter Kitwhich contains the following:Co-linear Flex AdapterOuter PipeInner Pipe Adapter510-994 Rigid Pipe AdaptorAlternate Approved Caps980 Vertical Termination Cap991 High Wind Cap923GK 3" Co-linear Adapter with flashingFPI Cabinet and/or Flat Wall Mantlesmay be used in these applicationsensuring that clearances to com-bustibles are maintained.