Regency PG36NG5-R Owner's Installation Manual

Regency ® PG36-5 Gas Log Fireplace12Flue Adapter(Part# 510-994)Pipe LengthRound SupportBox/Wall Thimble(Part # 940)RoundSupport Box/Wall Thimble(Part # 940)VerticalTerminalStorm CollarPart # 953Flashing943 or 943SCeiling Firestop(Part # 963)24" (610mm)Pipe LengthAdj.Pipe Length11" - 14-5/8"(279mm - 372mm)90 ElbowoAstroCapWall ThimblePart # 942Vinyl SidingStandoff (Optional)Part #950INSTALLATIONSimpson Dura-VentCo-Axial Flue GSSIMPSON DURA-VENT FLUEINGHorizontal or Vertical TerminationsThe Simpson Dura-Vent Co Axial Flue System offers a complete line of component parts for installation of both horizontal and vertical installations. Manyitems are offered in decorative black, as well as galvanized finish. We recommend using the galvanized finish for installation with the PG36.The minimum components required for a basichorizontal termination are:1 Horizontal Termination Cap1 90 o Elbow1 Flue Adaptor1 Wall Thimble1 Length of pipe to suit wall thickness(see chart)If a Vinyl Siding Standoff is required (it mustbe used with vinyl siding), measure to outsidesurface of wall without siding and add 2inches.SIMPSON DURA-VENT FLUEING COMPONENTS LISTAll Simpson Dura-Vent components are available directly from Masport.971 Horiz. Termination Kit includes: 90o blackelbow, wall thimble cover, horiz. squaretermination cap, 24" black pipe, and 11"-14" 5/8" adjustable black pipe970 Basic Horiz. Termination. Kit includes:90o black elbow, wall thimble cover,horiz. square termination cap978 Vert. Termination Kit includes 0/12 -6/12 pitch adjustable flashing, stormcollar, low profile term. cap908B 6" (152mm) Pipe Length - Black907B 9" (229mm) Pipe Length - Black906 12" (305mm) Pipe Length - Galv.906B 12" (305mm) Pipe Length - Black904 24" (610mm) Pipe Length - Galv.904B 24" (610mm) Pipe Length - Black903 36" (914mm) Pipe Length - Galv.903B 36" (914mm) Pipe Length - Black902 48" (1219mm) Pipe Length - Galv.902B 48" (1219mm) Pipe Length - Black911B 11"-14 5/8" (279mm - 372mm) AdjustablePipe Length - Black917B 17"- 24" (432mm - 610mm) AdjustableLength - Black945 45O Elbow - Galv.945B 45 O Elbow - Black945G 45 O Elbow - Swivel - Galv.945BG 45 O Elbow - Swivel - Black990 90O Elbow - Galv.990B 90 O Elbow - Black990G 90 O Elbow - Swivel - Galv.990BG 90 O Elbow - Swivel - Black991 High Wind Termination Cap (Vertical)980 Vertical Termination Cap984 Horizontal Square Termination Cap985 Horiz. Square High WindTermination Cap982 Snorkel - 14"(356mm) Rise Term.Cap981 Snorkel - 36" (914mm) RiseTermination Cap940 Wall Thimble - Support/Box941 Cathedral/Ceiling - Support/Box3951 Brass Trim for Wall Thimble/Ceiling Sup.963 Firestop Spacer943 Flashing 0/12-6/12943S Flashing 7/12-12/12953 Storm Collar950 Vinyl Siding Standoff988 Wall Strap942 Wall ThimbleParts not supplied by Dura-Vent946-506/P Flue Guard (Optional)510-994 Dura-Vent Flue Adaptor640-530/P Riser Flue Terminal946-205 Vinyl Siding Shield for Riser FlueTerminalPart # Description Part # Description Part # DescriptionFlat Wall InstallationWall Thickness(inches)Vent Length Required(inches)4" - 5-1/2" 6"7" - 8-1/2" 9"10" - 1-1/2" 12"9" - 14-1/2" 11" - 14-5/8" Adj. Pipe15" - 23-1/2" 17" - 24" Adj.Corner InstallationWall Thickness(inches)Vent Length Required(inches)3-1/4" - 6-3/4" 11" - 14-5/8" Adj. Pipe7-3/4" - 16-1/4" 17" - 24" Adj. Pipe7-1/4" - 8-3/4" 6" + 12"9" + 9"4-1/4" - 5-3/4" 6" + 9"Wall thickness is measured from the backstandoffs to the inside mounting surface oftermination cap. For siding other than vinyl furringstrips may be used, instead of the vinyl sidingstandoff, to create a level surface to mount theflue terminal. The Terminal must not be recessedinto siding. Measure the wall thickness includingfurring strips.