U32SE-5 FPI Direct Vent Gas Insert 3This FPI Mobile/Manufactured Home listed appliance comesequipped with a dedicated #8 ground lug to which an 18 gaugecopper wire from the steel chassis ground must be attached.This FPI Mobile/Manufactured Home Listed appliance comesfactory equipped with a means to secure the unit.INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALEThis FPI product has been tested and listed by Warnock Hersey as a Direct Vent Wall Furnace to the following standards: CAN/CGA-2.17-M91, and ANSI Z21.88-2009/CSA 2.33-2009.This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and theManufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria forManufactured Home Installations, Sites, and Communities ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standardin Canada. See section "Manufactured Mobile Home Additional Requirements" for additional requirements.This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence oflocal codes follow the current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in theU.S.A., and the current CAN/CGA B149 Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.