SaMASZ SAMBA 160 Operator's Manual

Also see for SAMBA 160: Operator's manual Operator's manual

Operator's manual Light-class, rear disc mowerSAMBA- 29 -9. DISASSEMBLY AND WITHDRAWAL FROM USE9.0. RepairBefore any repair or service works clean the mower thoroughly and remove any grass, dirt ormud.Carefully check nuts and bolts for adequate torque and pins for wear. If necessary, replacescrews, pegs, V-belts, pins, bushings, disks, knives, knife holders, bearings etc.NOTE:Before any repair works disconnect the mower from the tractor.9.1. ScrappingWhen unhitching the machine pay particular attention to dangers involved such as possibility ofcrushing or cutting injury. Use special personal protective equipment: gloves, protective clothing,glasses etc. Pay attention not to let the machine lose its stability and secure it with supports.If the mower cannot be repaired anymore, it should be withdrawn from use.To do so, oil from intersecting axis gear and cutterbar should be drained and delivered to aproper waste treatment company. Clean the mower parts, dismantle and dispose properly of all plasticparts. After that, the mower can be scrapped.10. WARRANTY CARDLIGHT CLASS REAR DISK MOWERThe product quality has been checked and meets the required standards and regulations and ispermitted for use.NOTE: A warranty card without the required information or with corrected or illegibleinformation – is invalid.Serial numberDate of manufactureManufacturer’s stampQC signatureDate of purchaseDealer’s stampDealer’s signature

/ 33

Related manuals for SaMASZ SAMBA 160