Operator's manual Light-class, rear disc mowerSAMBA- 4 -3.1. Design and working principleFig. 2. Parts of SaMASZ rear disk mower SAMBA1 – Linkage2 – Cylinder with support spring3 – Belt gear4 – Cutterbar5 – Swath guide6 – Safety guard7 – Disk type swath guide (option)8 – 3-point linkage frameLinkage (1) enables attaching the mower to tractor's 3-point linkage. Drive from tractor's PTOis transmitted by belt gear (3) onto EcoCUT cutterbar (4). Hydraulic lifting cylinder (2) fed from theexternal tractor’s hydraulics is used to adjust the mower to working position. On 3-point linkage frame(8) the spring-suspended cutterbar is set. The frame has also swath guides (5), which are delivered asstandard, optional disk type guides (7) and protective guard (6).3.2. Standard equipment and spare partsThe mowers are sold with the following standard equipment: warranty card, operator's manual with spare part list, cutting knives: additional set, PTO shaft with overrunning clutch, spray paint (150 ml).Optional extra equipment: warning plates with combined lights and reflectors, warning triangle, double rubber guide.Tab. 2. Recommended PTO shaftMower Power Length Torque Symbol Clutch Manufacturer RemarksHP ft. in NmSAMBA 160SAMBA 200SAMBA 240SAMBA 28035 2' 2"-2' 11" 460 7G3N066CE007096MA Right-handoverrunningBONDIOLI&PAVESI76453218