Operator's manual Light-class, rear disc mowerSAMBA- 3 -3. PROPER AND INTENDED USELight class rear disk mowers SAMBA are designed to operate on smaller farms, and are intendedto mow green fodder such as grass and alfalfa on permanent grassland (pastures), on crop fieldswithout rocks, and to form loose rows of cut forage. They do well in mountainous as well as swampareas, where the machine's and tractor's weight is of great importance. Application of innovativesuspension assembly enables adjusting optimal pressure of the cutterbar onto the ground.Meadows or fields to be mowed should be even, previously prepared by rolling and subjected toother treatment.NOTE: Grass, which has not grown much should be mowed with zero angle inclination.WARNING:Use of the mower for purposes other than described above is forbidden. Improper usecan be dangerous and may lead to voiding of the warranty. Mower should be operatedand repaired only by people familiar with its detailed specifications and with allapplicable safety rules and regulations and with the relative dangers. Unauthorizedmodifications to the mower will lead to voiding the warranty.3.0. Technical dataTab. 1. Machine specificationSAMBA 160 SAMBA 200 SAMBA 240 SAMBA 280Working width [ft/in] 5' 3" 6' 7" 7' 10" 9' 2"Number of knives [pcs] 8 10 12 14Number of disks [pcs] 4 5 6 7Tractor's PTO rears [rpm] 540Tractor power required [HP] from 20 from 30 from 45 from 60Working capacity [ha/h] ~ 1.5 ~ 2.0 ~ 2.5 ~ 3.0Transport length [ft/in] 5' 10"Transport width [ft/in] 5' 7"Width after aggregation [ft/in] 12' ⅞" 12' 12" 13' 11" 14' 9"Transport height [ft/in] 7' ¼" 8' 3" 9' 6" 10' 9"Weight [kg / lbs] 410 / 904 445 / 981 490 / 1,080 505 / 1,113Cutting speed of the knife [m/s] 83Disc rotation speed [rpm] 31153-point linkage category II II II IINoise level LpA 77.0 ± 3.0 dBLAmax 76.0 ± 3.0 dBLCpeak 98.5 ± 3.0 dBLpA – noise level related to 8 hour working time. Averaged in time acoustic pressure level corrected byfrequency characteristic A.LAmax – maximum value corrected by frequency characteristic A of acoustic pressure level.LCpeak – peak level of acoustic pressure corrected by frequency characteristic C.