Saeco HD8750/47 User Manual

31ENGLISH10 Remove the water tank, rinse it and fill it up to the MAX level with freshwater. Place it back into the machine.11 Empty the drip tray and place it back.12 Empty the container and place it back under the steam/hot waterwand and the dispensing spout.13 Press “ ” to start the rinsing cycle.14 When the rinsing is finished, the “ ” light turns on and the “ ”but-ton flashes.15 Remove the water tank, rinse it and fill it up to the MAX level with freshwater. Place it back into the machine.16 Empty the drip tray and place it back.17 Empty the container and place it back under the steam/hot waterwand and the dispensing spout.18 Repeat steps 13 to 17 once more. Then continue with step 1919 The machine heats-up and the automatic rinsing cycle starts to prepa-re for product brewing.20 The descaling cycle is completed.21 Place back the “INTENZA+” water filter into the water tank if it wasinstalled and the Pannarello.Note:At the end of the descaling cycle, wash the brew group as described in the“Weekly Cleaning of the Brew Group” chapter.The two rinse cycles are performed in order to have the circuit cleanedwith a preset amount of water to ensure proper machine performance.If the water tank is not filled up to MAX level, the machine might requirethree or more cycles.