Saeco Office One SUP028R Operating Instructions Manual

Also see for Office One SUP028R: Operating instructions

• 45 •ENGLISHInstallation of the machine - Service Provider Manual2. Service menu Press ENTER to access Service menu modePassword Insert password Default value:Default: 0000Enter the previously entered and stored password (4 digits) to access the servicemenu.2.1. Date & Time 2.1.1. Time Set clock hour and minutes2.1.2. Date 2.1.2.1. Day Set the day2.1.2.2. Month Set the month2.1.2.3. Year Set the year2.1.2.4. Day of the week Set the day of the week2.2. Audit 2.2.1. Total from reset 2.2.1.1. Total from reset Number of products type 1, 2 and 3 dispensed from last reset2.2.1.2. Prod1 from reset Number of products type 1 (short) dispensed from last reset2.2.1.3. Prod2 from reset Number of products type 2 (medium) dispensed from last reset2.2.1.4. Prod3 from reset Number of products type 3 (long) dispensed from last reset2.2.1.5. Last reset (read only) Date and hour of last audit reset2.2.1.6. Reset AuditDefault: No Yes cancels all audit values referred to the last Reset2.2.2. Total from init 2.2.2.1. Total from init (read only) Number of products type 1, 2 and 3 dispensed from last applianceinitialization2.2.2.2. Prod.1 from init (read only) Number of products type 1 (short) dispensed from last appliance ini-tialization2.2.2.3. Prod.2 from init (read only) Number of products type 2 (medium) dispensed from last applianceinitialization2.2.2.4. Prod.3 from init (read only) Number of products type 3 (long) dispensed from last appliance ini-tialization2.2.2.5. Last init. (read only) Date and hour of last appliance initialization2.3. Brew unit wash 2.3. Brew unit washDefault: No Yes starts up the brew unit washing process.2.4. Descaling 2.4.1. Remaining qty (Read only)Quantity of water (litres) remaining for next descaling2.4.2. Last descalc. (Read only)Date/time of last descaling2.4.3. Do it nowDefault: No Yes starts up descaling process2.5. Filter cleaning 2.5. Filter cleaningDefault: No Yes starts up softener filter washing process2.6. Errors 2.6.1. Error log 2.6.1.1.(errors can be displayedwith up/down buttons)(Read only)Last 5 errors are displayed: It lights up only if there is an error at least.0 = oldest error5 = the last error2.6.2. Log resetDefault: No Yes cancels all the error log2.6.3. Error resetDefault: No Yes cancels all possible errors and out-of-service conditions.2.7. Credits 2.7.1 Warning levelDefault: 30Set the minimum number of credits to display the credits warning message.Range (0…255)2.8. Security 2.8.1. PasswordDefault: 0000Set service menu mode access password (4 digits) different from 0000 defaultvalue.2.9. Identification 2.9.1. Operator PINDefault: 00000The Service Provider’s or the Operator’s code are identified by:a numerical value between 0 and 65535.In versions equipped with Tag Reader, this code is compared to that on the labelson the capsule boxes. Credit loading will be enabled only if this code and the codereported in section 1.1.1 correspond to those on the label.11.4 Description of service menu