Saeco V'spresso Operating Instructions Manual

Contents

ENGLISH17PROGRAMMING MACHINE FUNCTIONSDESCALING *SIGNAL.DESCAL. DESCALINGFILL WATERTANKDESCALINGFILL WATERTANKTIMER *RINSING CYCLE STANDBYAFTER 3:00 STANDBYAFTER 1:15RINSING CYCLE *FACTOR.SETTINGS RINSING CYCLE FILL WATERTANKRINSINGCYCLE TIMER DESCALINGThe machine will carry outa rinsing cycle.When the cycle is finishedthe FILL WATER TANKmessage will be displayed.This function is used to rinse all the coffee-dispensing partswith water.The rinsing cycle cannot be interrupted.A person must be present during this operation.Use the buttons to adjustthe timer setting.The switch-off time can be adjusted, in 15-minute intervals,to a minimum of 15 minutes; the function cannot bedeactivated.Prepare the machine fordescaling.This function enables you to activate an automaticdescaling cycle. See page 10 for step by step descalinginstructions.Warning: a large quantity of water may bedispensed from the coffee dispenser. Beforestarting, empty out the drip tray and keep an additionalcontainer handy.When the function ap-pears, select it using the“M” button.When the function ap-pears, select it using the“M” button.When the function ap-pears, select it using the“M” button.Carry out an automaticdescaling cycle (see page10) or press "ESC" to exit ifdescaling is not yet needed.Press the “M” button toconfirm your choice.This is a factory-set function that automatically switchesthe machine into “Standby” after a maximum of 3 hourshave elapsed since the last cup of coffee was dispensed.

/ 20

Related manuals for Saeco SUP021YTDR