Saeco Xelsis SM7686 Manual

Also see for Xelsis SM7680: Quick start guide User manual

Contents

1. Activating the AquaClean filter during first installationAfter switching on for the first time, the machine guides you through the first installation steps such asfilling the water tank, filling the water circuit and activating the AquaClean filter. Simply follow theinstructions on the screen.2. Activating the AquaClean filter when promptedReplace the AquaClean filter when the screen shows the message 'Replace AquaClean filter?'. Thenfollow the instructions on the screen to activate the filter properly.Replace the AquaClean filter at least every 3 months, even if the machine has not yet indicated thatreplacement is required.3. Activating the AquaClean filter at any other timeYou can start using the AquaClean filter at any time by following the instructions below.1 Tap the Settings icon and then select 'AquaClean' (Fig. 5).2 Select 'new' and when the activation screen appears, press the start/stop button.3 Follow the instructions on the screen.Note: In some situations the machine will tell you that you need to descale the machine before youcan install and activate a new AquaClean filter. This is because your machine has to be completelylimescale-free before you start to use the AquaClean filter. Follow the instructions on the screen.Measuring water hardnessDuring first installation, you have to set the water hardness. Follow the steps on the screen and usethe water hardness test strip supplied. To set the water hardness later, tap the Settings icon andselect 'water hardness'.1 Immerse the water hardness test strip in tap water for 1 second. Then wait for 1 minute.2 Check how many squares have turned red.3 Select the appropriate water hardness setting and tap the OK icon to confirm.Number of red squares:Value to be set 1 2 3 4Brewing drinksTap the Drinks icon to enter the 'Drinks' menu. Scroll through the different pages to find your drink.After selecting a drink you can personalize it by adjusting the settings (see 'Personalizing your drinks').- Tap the '2x' icon if you want to brew two cups (Fig. 6). The machine automatically carries out twogrinding cycles in sequence of the selected drinks.- Tap the Profiles icon to brew one of your saved drinks.- Slide the dispensing spout up or down to adjust the height to the size of the cup or glass you areusing.Brewing coffee drinks1 Fill the water tank with tap water and fill the bean hopper with beans.2 Tap the Drinks icon and select your coffee.11English