Saeco Xelsis SM7686 Manual

Also see for Xelsis SM7680: Quick start guide User manual

Contents

Warning icons and error codesMeaning of the warning iconsFill the water tank with fresh waterto the MAX level indication.Close the service door.The bean hopper is empty. Put newcoffee beans in the bean hopper.Close the lid of the bean hopper.The brew group is not inserted or isnot inserted correctly. Insert thebrew group and make sure that itlocks into place.The internal cappuccinatore is notinserted or is not inserted correctlyand/or the spout door is open. Makesure that the holes in thecappuccinatore are aligned with thetubes in the machine before youpush the internal cappuccinatoreupwards into place. Then close thespout door.The coffee grounds container is full.Make sure that the machine isswitched on. Then remove andempty the coffee ground container.The coffee grounds container is notin place. Place back the coffeegrounds container.The machine needs to fill the watercircuit with water. Make sure thereis water in the water tank and pressthe start/stop button to start.Meaning of error codesBelow you find a list of the error codes showing problems that you can solve yourself. Videoinstructions are available on www.saeco.com/care. If another error code appears, please contact thePhilips Consumer Care Center in your country. For contact details, see the warranty leaflet.Errorcode Problem Possible solution01 The coffee funnel isclogged.Switch off the machine and unplug it. Remove the brew group.Then open the lid of the pre-ground coffee compartment andinsert the spoon handle. Move the handle up and down untilthe clogged ground coffee falls down (Fig. 31). Visitwww.saeco.com/care for detailed video instructions.03 The brew group is dirtyor not well-greased.Switch off the machine with the main switch. Rinse the brewgroup with fresh water, let it air-dry and then lubricate it.Consult chapter 'Cleaning the brew group' or visitwww.saeco.com/care for detailed video instructions. Thenswitch the machine on again.18 English