Setting the Time and Using the TimerSetting the Current TimeSystem Time Clock Try NowSet the clock manually or automatically. Once the clock has been set, you can press the INFO buttonon the standard remote or press the MENU/123 button on the smart control, then select the INFO tocheck the current time." The clock must be reset every time the power is disconnected.Setting the Clock using Digital Broadcast InfoSystem Time Clock Clock Mode Try NowSet Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel.To enable this option, the TV's Antenna jack must be connected to either an antenna or a cableoutput and must be receiving digital broadcasts. The accuracy of the time information received mayvary depending on the channel and signal. If your TV is connected to a set-top-box using HDMI orComponent connections, you must set the time manually.If the Clock is Wrong in Auto ModeSystem Time Clock Clock Mode Time Offset Try NowIf the time set automatically is incorrect, you can offset the clock in 1-hour increments by as much as-/+ 12 hours. Select System Time Clock Clock Mode Time Offset and offset the clock to thecorrect time." Time Offset adjusts the time through network connections and is only available if the Clock is set to Autoand the TV is connected to the Internet though a local area network." Time Offset will adjust the time if the TV fails to receive time information through normal digital broadcastsignals.Setting the Clock ManuallySystem Time Clock Clock Set Try NowManually enter the time. Set Clock Mode to Manual and then select Clock Set to enter the currenttime and date.Clock Set: Set the current Date and Time.
