Pairing Samsung Smart ControlTo control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV viaBluetooth." Samsung Smart Control can only be paired to a single TV.1. Point Samsung Smart Control at the remote control sensor of the TV and press the button toturn the TV on." Remote control receiver’s location may vary depending on the model.2. The Bluetooth icon will appear on the screen as shown below. The TV will then attempt toconnect to the Samsung Smart Control unit automatically.Reconnecting Samsung Smart ControlIf the Samsung Smart Control stops operating or works abnormally, replace the batteries as this maybe due to insufficient battery power.If the problem persists, the Samsung Smart Control restore pairing with the TV.1. Press RETURN-EXIT button and EXTRA button simultaneously for 3 seconds." You must place the Samsung Smart Control approximately 30cm ~ 40cm away from the TV and ensureit is pointing towards the remote control receiver.2. Connection image is appeared on the screen. And then, Samsung Smart Control is connecting toTV automatically.
