Connecting to an Audio DeviceUsing an Optical (Digital) or an Audio (Analog) Cable ConnectionAvailable devices: Digital Audio System, Amplifier, DVD home theater✎ DIGITAL AUDIO OUT (OPTICAL) When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volumeof both the TV and the system. 5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH. When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When theTV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is adigital component such as a DVD player / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver andand you connected it to the TV via HDMI, you will only hear 2 CH audio from the home theater receiver. If youwant to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STBsatellite receiver directly to an amplifier or home theater.✎ AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater. When connecting, use the appropriate connector. When you connect an audio amplifier to the AUDIO OUT jacks, decrease the volume of the TV and adjust thevolume level with the amplifier’s volume control.Connecting to a PCUsing an HDMI cable or an HDMI to DVI cable or a D-sub cable✎ Your PC may not support an HDMI connection.AUDIO OUTPC OUTAUDIO OUTDVI OUTHDMI OUT ! ( OPTICAL WRR-AUDIO-LAUDIO IN )* Amplifier /DVD home theaterDigital Audio System