◀ ▶EnglishManual: Set the current time manually.N Depending on the broadcast station and signal, the auto time set upmay not be correct. In this case, set the time manually.– Clock Set: Set the Date and Time.Select Clock Set. Select Date or Time, and then press ENTERE. Use thenumber buttons to enter numbers or press the up and down arrow buttons.Use the left and right arrow buttons to move from one entry field to the next.Press ENTERE when done. To exit Clock Set, select Close, and thenpress ENTERE.N Available only when Clock Mode is set to Manual.N You can set the Date and Time directly by pressing the number buttonson the remote control.
