first station to hang up, simply press another DSS button. ORPress the CALL button or C.O. line key to return to the outside party and beginthe transfer process again.When you are transferring a call to a keyset set for Voice Announce or AutoAnswer, the transferred call will always ring.NOTES:1. After the inside party answers, you may alternate back and forth between theparties by pressing the TRANSFER key.2. If you receive No More Calls tone, that station has no key available to receiveanother call. Press TRANSFER to return to the other party.3. You cannot transfer an Intercom call by pressing a DSS key.You must press theTRANSFER key and dial the destination extension number.TRANSFER WITH CAMP-ONWhen you are transferring a call to another station and you receive a busy signal,you may camp the call on to this station. Simply hang up when you hear the busysignal. The called party will be alerted that a call is waiting for them.NOTE: If you receive No More Calls tone, that station has no key available to receiveanother call. Press TRANSFER to return to the outside caller.TRANSFER TO VOICE MAILThis feature is used to send a call directly to a voice mailbox.Your keyset must havea correctly programmed VT key to accomplish this. To transfer a call directly to avoice mailbox:• While on a call, press the VT key and dial the mailbox number.• Hang up when dialing is completed.NOTE: The VT key will not work with a Centralized Voice Mail in a Network System.CALL WAITINGIf an outside call has been camped-on to your phone or another station hascamped-on to you:• Your keyset will ring and the call that is waiting for you (camped-on) will flashgreen.• Press the flashing button to answer; your other call will go on hold automati-cally if your station has the Automatic Hold feature set. If not, you must pressHOLD and then the flashing button. ORFinish the first call and hang up; the waiting call will ring.21• Lift the handset or press the ANS/RLS key to answer.NOTE: Intercom calls will not go on Automatic Hold.CONFERENCE CALLSYou may conference up to five parties (you and four others) in any combination ofoutside lines and internal stations in any order.• While engaged in a conversation, press the CONF key and receive conferencetone.• Make another call, either intercom or outside, press the CONF key and receiveconference tone.• Make another call or press the CONF key to join all parties.• Repeat the last step until all parties are added.NOTE: When attempting to add another party to the conference and you are notable to reach the desired person, hang up. Simply press the CONF key again toreturn to your previous conversation.To drop a party from your conference call:• Press CONF and dial the extension or line number that is to be dropped.• Press CONF again to reestablish the conference.NOTE: To leave the conference, hang up. Control is passed to the next internal sta-tion. If there are no internal stations and you wish to leave outside lines connect-ed together in a trunk to trunk conference, press the CONF key plus the CALL but-ton that the call appears on or follow the instructions to drop a party and use yourextension number. When they hang up, the lines will release automatically. PressCONF to rejoin a trunk to trunk conference.CONFERENCE SPLITTINGIf you are the controlling party of a conference and your keyset has the Auto Holdfeature turned on (See Customizing Your Keyset) and all of the outside lines involvedin the conference appear as buttons on your keyset, you can split the conferenceinto separate calls as follows:• Press any one of the outside line buttons. That outside line will remain steadygreen to indicate you are still connected to it. All other outside lines in theconference will be placed on system hold at your keyset. All intercom callersin the conference will be disconnected. You may now speak with each callerprivately and transfer them as usual or reestablish another conference.22