27DIALING FEATURESSPEED DIALINGYou can dial a preprogrammed telephone number stored in the system-widespeed dial list of numbers 500–999 or from your personal list of numbers 00–49.You system may be set for 950 system wide numbers. If so the system speed dialaccess codes are 050~999 and the station speed dial codes are 000~049.• With the handset on-hook, press the MEMORY key or dial 16.• Dial the desired speed dial number.• The telephone number is automatically dialed for you.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER key before you begin dialing.PROGRAMMING PERSONAL SPEEDDIAL NUMBERSYou can program frequently dialed telephone numbers in a personal speed diallist. A station may be assigned up to fifty numbers, 00–49. See your system admin-istrator to determine the amount assigned to your station.• While on-hook, press TRANSFER and then dial 105.• Dial a speed dial number (00–49).• Dial a line or line group access code.• Dial the telephone number to be stored (24 digits maximum). It can include #,4, FLASH and PAUSE.• Press TRANSFER to store the number.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER key before you begin dialing.Transfer SpeakerA BC DE FA C ETransferSpeakerVOLUMEB D F28D KEYSET18D KEYSETDEFAULTPROGRAMMING KEYSLAYOUT8D KEYSET DEFAULTPROGRAMMINGKEYS LAYOUTFor the purposes of programming speed dial numbers, the programmable keysare known as A, B, C, D, E and F and are defined below.• The A key is not used.• The B key inserts a flash.• The C key inserts a pause.• The D key is used for pulse to tone conversion. If your system uses rotary (orpulse) dialing C.O. lines, pressing D while entering a speed dial number caus-es all subsequent digits to be sent as DTMF tones.• The E key is used to hide digits. Display keyset users may want to hide somespeed dial numbers so that they will not show in the display.When you are en-tering a telephone number, press E. All subsequent digits will be hidden. PressE again to begin displaying digits.• The F key is used to enter a name. See Personal Speed Dial Names underDisplay Features.• Use the HOLD key to clear a speed dial number.ONE TOUCH SPEED DIALINGYou may assign any speed dial number to an already existing One Touch SpeedDial button for quick and easy dialing of frequently used numbers.• While on-hook, press TRANSFER and then dial 107.• Press a One Touch Speed Dial button.• Dial the speed dial number (00–49 or 500–999) that you want assigned tothis button.• Press TRANSFER to store your selection.To call this telephone number, just press the One Touch Speed Dial button.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER key before you begin dialing.LAST NUMBER REDIALTo redial the last telephone number you dialed, press the REDIAL key or dial 19.NOTES:1. If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER key before you begin dialing.2. Redial does not apply to intercom calls.28