DIAL 8 T U V Q 8DIAL 9 W X Y Z 9DIAL 4 : = [ ] 4NOTES:1. When the character you want appears on the same dial pad key as the previ-ous character, press UP to move the cursor one space to the right.2. Other symbols are available for DIAL #.To cancel an individual alarm and reminder message:• Press TRANSFER and then dial 112.• Dial alarm number 1, 2 or 3.• Press the HOLD key.• Press the TRANSFER key.PERSONAL SPEED DIAL NAMESEach personal speed dial number can have an 11 character name assigned to it.This name is used to select the speed dial bin when you are dialing by directory.• Press TRANSFER and then dial 106.• Dial the speed dial bin number 00–49.• Write your message using the procedure described in Alarm Reminder Mes-sages.• Press the TRANSFER key to store the speed dial name.• Repeat for each speed dial bin if necessary.STATION NAMESYou can assign an 11 character name to your keyset. This allows other display key-set users to call you using the directory dial feature.To program a station name:• Press TRANSFER and then dial 104.• Enter the 11 character name using the procedure described in Alarm Remind-er Messages.• Press TRANSFER to store the name.49MANAGING KEY ASSIGNMENTSYou can view your key assignments and add extenders to some of your program-mable keys for easy one touch operation of frequently used features.• While on-hook, press TRANSFER and then dial 107.• Use the VOLUME keys to scroll through all of your programmable keys ORPress the programmable key to which you want to add the extender.• When you reach a key listed below, dial the corresponding extender.• Press TRANSFER to store and exit programming.Please refer to the Enhanced Display Programming Section provided by yourinstallation company when requested for a complete list of descriptions andextenders for any keys you may have programmed on your keyset.NOTE: Confirm that the cursor is placed correctly before you enter the extender.LCR WITH CLEARWhen you are making an outside call using LCR and dial an incorrect digit, you canpress the CLEAR soft key to reenter the telephone number. You do not need toredial 9 to reaccess LCR.BACKSPACE WITH LCRIf you misdial while using LCR, you can delete digits shown in the display by press-ing the BSPC soft key as many times as necessary.50