Samsung 7B User Manual

Also see for LCD 12B: User guide User guide User guide User guide

Contents

22• The B key inserts a flash.• The C key inserts a pause.• The D key is used for pulse to tone conversion. If your system uses rotary(or pulse) dialing C.O. lines, pressing D while entering a speed dial numbercauses all subsequent digits to be sent as DTMF tones.• The E key is used to hide digits. Display keyset users may want to hidesome speed dial numbers so that they will not show in the display. When youare entering a telephone number, press E. All subsequent digits will be hid-den. Press E again to begin displaying digits.• The F key is used to enter a name. SeePersonal Speed Dial Names underDisplay Features.• Use the HOLD key to clear a speed dial number.ONE TOUCH SPEED DIALINGYou may assign any speed dial number to an already existing One Touch SpeedDial button for quick and easy dialing of frequently used numbers.• While on-hook, press TRSF and then dial 107.• Press a One Touch Speed Dial button.• Dial the speed dial number (00–49 or 500–999) that you want assigned tothis button.• Press TRSF to store your selection.To call this telephone number, just press the One Touch Speed Dial button.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press SPK or the MONITOR key if you are using a 7B phone beforeyou begin dialing.LAST NUMBER REDIALTo redial the last telephone number you dialed, press the LNR key or dial 19.NOTES:1. If the Hot Keypad feature has been turned off, you must first lift the handsetor press SPK or MONITOR before you begin dialing.2. Redial does not apply to intercom calls.SAVE NUMBER WITH REDIALTo save the number you just dialed for later use, press the SNR key beforehanging up.To redial this saved number at any time, press the SNR key or dial 17. The sameline will be selected for you.NOTES:1. If the Hot Keypad feature has been turned off, you must first lift the handsetor press SPK or MONITOR key if you are using a 7B phone before you begindialing.2. The saved telephone number is stored in memory until you save another.3. Redial does not apply to intercom calls.CHAIN DIALINGYou may manually dial additional digits following a speed dial number or chainas many speed dial numbers together as required:• After the first speed number is dialed, press SPD again and dial anotherspeed number OR manually dial additional digits following a speed dial num-ber.AUTOMATIC REDIAL/RETRYWhen you are making an outside call and you receive a busy signal, the systemcan automatically redial the number for you. It will automatically redial at a pre-programmed interval for up to 15 attempts.• When you hear a busy signal, press the RETRY button.• The system will reserve the line and automatically redial the same numberfor you. You will hear the call being made through the keyset speaker. Themicrophone is muted.• When the called party answers, you must pick up the handset or press ANSRLS key before you can begin speaking. You must answer within 10 sec-onds.NOTES:1. If you make another call, auto-redial is canceled.2. To cancel a retry, lift and replace the handset.PULSE TO TONE CHANGEOVERWhen making an outside call on a dial pulse line, press #. All digits dialed afterthe # with be sent as tones.DIAL BY VOICEDial by Voice is the ability to record a voice pattern into a digital format and storeit to an addressable location. When the Dial by Voice feature is activated, it willsample, identify, retrieve and process the associated stored data. This latesttechnology has been applied to the area of personal speed dialing. It allows thecalling party to speak a name into the handset and have the system place acall. This feature can be used by all types of stations. NOTE: The Dial by Voice23