Samsung 7B User Manual

Also see for LCD 12B: User guide User guide User guide User guide

Contents

To program a station name:• Press TRSF and then dial 104.• Enter the 11 character name using the procedure described inAlarm Re-minder Messages.• Press TRSF to store the name.MANAGING KEY ASSIGNMENTSYou can view your key assignments and add extenders to some of your pro-grammable keys for easy one touch operation of frequently used features.An extender is a number that makes an otherwise general key very specific.Adding the digit “4” to a PAGE key defines this key for paging zone four. Adding“225” to a different pickup key will define this key as pickup for extension 225only. The key must already be assigned by the installing technician.• While on-hook, press TRSF and then dial 107.• Use the VOL keys to scroll through all of your programmable keys ORPress the programmable key to which you want to add the extender.• When you reach a key listed below, dial the corresponding extender.• Press TRSF to store and exit programming.KEY DESCRIPTION EXTENDERBOSS .............. Boss/Secretary ................ 1–4DP ................... Direct Pickup .................... Extension or station group numberDS ................... Direct Station ................... Any extension numberFWRD .............. Call Forwarding ................. 0–6GPIK ................ Group Pick-Up .................. 01–20IG .................... In/Out of Group ................ Any group you are part of 500–529MMPG ............. Meet Me Page .................. 0–9, ✱PSMG .............. Programmed Message ..... 01–20PAGE ............... Page ................................. 0–9, ✱SG ................... Station Group ................... 500–529SPD ................. Speed Dialing ................... 00–49, 500–999DIR .................. Directory .......................... PERS (1), SYS (2) or STN (3)VT .................... Voice Mail Transfer ........... Voice Mail Group (501–529)[RELEASE 3 & 4 ONLY]NOTE: Confirm that the cursor is placed correctly before you enter the extender.WHAT IS CALLER ID?Caller ID is the name given to the telephone company-provided feature thatdelivers the telephone number and sometimes the name of the person callingyour phone. There are two types of Caller ID; the first delivers the calling party’stelephone number only and the second (sometimes referred to as “Deluxe” CallerID) delivers both the calling party’s telephone number and name as listed in thetelephone directory.40The DCS system can handle both types of Caller ID; in fact, in the case ofnumber only delivery, the system can be programmed to insert a name for aspecific telephone number (up to a maximum of 250 numbers).However, even though you are paying to receive Caller ID information, there aresome circumstances that mean you will not receive this information. The threemost common reasons are listed below along with the display information thatthe DCS will provide.PRIVATE The caller does not wish his/her name or number to berevealed to you. This type of call can be stopped at thetelephone company by dialing an access code on youroutside lines. This will redirect these PRIVATE calls toan announcement that states that you do not wish toreceive calls that have had Caller ID blocked. The codeto block these calls can usually be found in the frontsection of the telephone directory.OUT OF AREA The caller is calling from an area that cannot provideCaller ID information (for example, international calls) orhe/she is calling from a type of circuit that cannot pro-vide Caller ID information, for example, some outboundWATS lines.PAYPHONE The caller is calling from a coin-operated telephone. Thetelephone company will send this information as thereare no directory listings for pay phones. The number willbe delivered as usual.INVALID CID INFO This is a message that will be displayed when corrupted[RELEASE 4 ONLY] CID information is received from the Central Office.NO CID RECEIVED This is a message that will be displayed when the CID[RELEASE 4 ONLY] information is not received from the telephone company.NO CID DSP Caller ID Digital Signal Processors (CIDDSP’s) are[RELEASE 4 ONLY] resources in the DCS to receive and translate the CIDdata. If there are no CIDDSPs available at the time a callcomes in, this is the message you will see on your dis-play. In the unlikely event that [NO CID DSP] consis-tently appears consult with your service company.NOTE: The Caller ID features require optional software and/or hardware. Pleasesee your service and installation company for details.41