Samsung 8 series User Manual

Also see for Galaxy 8: User manual User manual User manual User manual User manual

Contents

21English03 Basic Features■ 3D Auto View (Off / On): If 3D Auto View is set to On,a “Side by Side” format HDMI signal with one of theresolutions below is automatically switched to 3D. Here,correct 3D information must be sent from the HDMI 1.3transmitter.✎ If a 3D failure occurs due to a 3D information error,set 3D Auto View to Off and manually select a3D Mode using the 3D button or correspondingmenu.✎ Support resolution (16:9 only)Resolution Frequency (Hz)1280 x 720p 60 Hz1920 x 1080i 60 Hz1920 x 1080p 24 / 30 / 60 HzResolution supported for HDMI PC modeThe resolution for HDMI PC mode is optimized to 1920 x1080 input.An input resolution other than 1920 x 1080 may not bedisplayed properly in 3D display or full screen mode.How to watch the 3D image1. Press the CONTENT button, then the Content Viewmenu will appear.2. Press the ◄ or ► button, then select 3D.To watch in 3D, wear 3D Active Glasses and press thepower button on the glasses.3. Select OK, then press the ENTERE button.4. Using the ◄ or ► buttons on your remote control, selectthe 3D Mode of the image you want to view.✎ Some 3D modes may not be available dependingon the format of the image source.Supported formats and operating specifications forHDMI 1.4Source signal format Standard HDMI 1.4 3D1920x1080p@24Hz x 2 1920x2205p@24Hz1280x720p@60Hz x 2 1280x1470p@60HzThe mode is automatically switched to 3D in one of thesource signal formats above.For the HDMI 1.4@24Hz format, the TV is optimized asfollows:– Resolution First Display Mode: If Auto Motion Plusis set to Off, Clear or Standard, you can watch thevideo at a high resolution optimized to the resolutionof the source video.– Judder Reduction Display Mode: When AutoMotion Plus is set to Smooth or Custom, you canwatch a smooth picture without judder.Before using 3D function...✎ NOTEx You may notice a small amount of screen flickeringwhen watching 3D images in poor light conditions(from a strobe light, etc.), or under a fluorescent lamp(50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim thelight or turn the lamp off.x 3D mode is automatically disabled in following cases:when changing a channel or the input source, oraccessing Media Play or Internet@TV.x Some Picture functions are disabled in 3D mode.x PIP is not supported in 3D mode.x 3D Active Glasses from other manufacturers may notbe supported.x When the TV is initially powered on, may take sometime until the 3D display is optimized.x The 3D Active Glasses may not work properly if thereis any other 3D product or electronic devices turnedon near the glasses or TV. If there is a problem, keepother electronic devices as far away as possible fromthe 3D Active Glasses.x Photos of Media Play are shown in “2D → 3D”mode only.x If lying on your side, the 3D-effects may not bedisplayed.x Be sure to stay within the viewing angle and optimumTV viewing distance when watching 3D pictures.– Otherwise, you may not be able to enjoy proper 3Deffects.3D3DUsing the LEFT / RIGHT keys on the remote control,select the icon suitable for the picture on screen.Using the LEFT / RIGHT keys on the remote control,select the icon suitable for the picture on screen.U Move E Enter e ExitU Move E Enter e Exit3DoK CancelU Move E Enter e ExitTo watch in 3d, wear 3d glasses andpress the power button on the glasses.Viewing 3d TV motion pictures for longperiods may cause eye fatigue and/ordizziness.