Removing Excess HumidityE-14If the atmosphere in your room is very humid or damp, you can removeexcess humidity without lowering the room temperature too much.The fan speed is selected automatically( : Automatic).4To control the direction of the air flow, refer to page 16.5If the is not displayed on the control panel, press the button on theremote control one or more times until it appears.Result: The indoor unit beeps each time you press the button. The air conditioner runs in the Dry mode.2You can change modes at any time.NNNN oooo tttt eeeeTo adjust the temperature, press the buttons one or more times until therequired temperature is displayed. Possible temperatures are between 18OCand 30OC inclusive.Result: Each time you press the buttons:- The temperature is adjusted by 1OC.- The indoor unit beeps. The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically.31 If necessary, press the (On/Off) button.Result: The power indicator on the control panel comes on. The indoor unit beeps.The air conditioner is fitted with a protection mechanism toprevent the unit from being damaged when it is startedimmediately after being: Switched on Stoppedlt will start up normally after three minutes.IMPORTANT