Inserting the Remote Control BatteriesOperating PreparationUsing the Control Panel on the Indoor UnitUsing the Remote ControlPush the battery cover on the rear of the remote control with your thumbin the direction of the arrow and remove it.Insert the two batteries, taking care to respect the polarities : + on the battery with + on the remote control. - on the battery with - on the remote control.12Close the cover by sliding it back until it clicks into place.3 Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months,even if they have not actually been used.You must insert or replace the remote control batteries when : You purchase the air conditioner The remote control does not work correctlyNNNN oooo tttt eeeeONTurn the power switch on.1Look around the indoor and outdoor unit. Confirm if any obstaclesthat may prevent the air flow are present near the air conditioner.E-8To operate the unit, the power switch is fitted to the wallmust be set to ON.IMPORTANTYou can operate with the indoor unit when you do not wish to or cannotoperate the air conditioner with the remote control.You can : Adapt the On/Off, Temperature, Fan Speed, Operation Mode andAir Swing settings to your specific requirements.Example : Remote control is broken or lost.All air conditioner features except Lock function can be controlled fromyour seat by using the remote control.You can : Adapt the Turbo, Long function and Fan Speed, Timer settingsto your specific requirements.NNNN oooo tttt eeee You must operate the Turbo, Long function and Off Timer withthe remote control.