Samsung APH523QF Owner's Instructions Manual

E-9Cooling Your RoomYou must select the Cool mode if you wish to adjust the : Cooling temperature Fan speed when cooling1 If necessary, press the (On/Off) button.Result: The power indicator on the control panel comes on. The indoor unit beeps.The air conditioner is fitted with a protection mechanism toprevent the unit from being damaged when it is startedimmediately after being: Switched on Stoppedlt will start up normally after three minutes.IMPORTANTIf the is not displayed on the control panel, press the button on theremote control one or more times until it appears.Result: The indoor unit beeps each time you press the button. The air conditioner runs in the Cool mode.2You can change modes at any time.NNNN oooo tttt eeeeTo adjust the temperature, press the buttons on the remote control orbuttons on the control panel one or more times until the required temperature isdisplayed. Possible temperatures are between 18OC and 30OC inclusive.Result: Each time you press the buttons:- The temperature is adjusted by 1OC.- The indoor unit beeps. The air conditioner starts cooling, provided that the roomtemperature is higher than the selected temperature. If the room temperature reaches the set temperature, the airconditioner stops cooling, but the fan is still operating.3Select the fan speed by pressing the button on the remote controlor button one or more times until the required setting is displayed :Result: Each time you press the button, the indoor unit beeps.Automatic(rotated : ➔ ➔ )LowHighTurbo4To control the direction of the air flow, refer to page 16.5