Samsung CHT-200 Instruction Manual

Also see for CHT-200: Instruction manual Instruction manual

Contents

GB20Presetting the Stations Manually☛ You do not need to preset the stations manually if youhave already set them automatically.1 Press the MENU button on the remote control.Result: The MAIN MENU is displayed.2 Press the corresponding ,❷ or ➛, ❿ buttons to select theINSTALLATION option.3 Press the ENTER button to select this option.Result: The INSTALLATION menu is displayed.4 Press the corresponding or ❷ buttons, until the MANUAL SETUP option is selected.5 Press the ENTER button to select a MANUAL SET UP option.Result: The TV STATION TABLE menu is displayed.6 Press the or ❷ buttons to select a programme number asrequired.7 Press the ❿button to preset the station.Result: The MANUAL TUNING menu is displayed.8 Press the or ❷ buttons until the SYSTEM is selected.9 Select the required system by pressing the ➛ or ❿ buttons.10 Press the or ❷ buttons until the CH is selected.11 Press the ➛ or ❿ buttons to start scanning.Result: The frequency band is scanned and the first stationfound is displayed.12 Press the or ❷ buttons until the NAME is selected.The station name is set automatically from the broadcast signal.13 To change the programme’s name, press the ❿button.Result: The first letter of the name flashes.14 To... Then...Select a character Press the or ❷ button until thein the name required character is displayed(letters, numbers or “-” character).Move to the next or Press the ➛ or ❿ buttonsprevious character respectively.15 If you... Then...Wish to store the Press the or ❷buttons until the MFTstation displayed is selected. Press the ➛ or ❿ buttons to adjust thepicture, if necessary. Press ENTER to store the stationDo not wish to Press the or ❷ buttons until thestore the station CH is selected.displayed Press the ➛ or ❿ buttons to go onscanning the frequency band and displaythe next station Go back to the beginning of Step 916 Repeat this procedure from Step 6 onwards, until all the requiredstations have been stored.17 On completion, press the RETURN button three times to exit themenu.☛ You do not need to preset the stations manually if youhave already set them automatically.VCRINSTALLATIONAUTO SET UPMANUAL SET UPTV SYSTEM :GVCR OUTPUT CH :CH36RETURN ❷ENTERMAIN MENUINSTALLATIONRETURN ❷➛❿ ENTERTV STATION TABLEPR CH NAME SYSTEM12345❷ ❿ SWAPPING:ENTERRETURN DELETE:CLEARMANUAL TUNINGSYSTEM : B/GPR : 1CH : ---MFT : -NAME : ----❷➛ ❿ MEMORY:ENTERRETURN