Samsung CHT-200 Instruction Manual

Also see for CHT-200: Instruction manual Instruction manual

Contents

GB30Using the Timer Programming FeatureVCRThe Timer Programming feature allows you to preset the DVD-VCRto record a programme up to one month before that programme isto be broadcast. Up to six programmes can be preset.☛ Before presetting a recording, check that the date andtime are correct.1 Press TIMER on the remote control.Result: The timer programme is displayed.2 Press ❿to select the input source.3 Select the required station by pressing the , ❷ buttons.4 Press ❿ to select the recording day.5 Select the required day by pressing the or ❷ buttons.6 Press ❿ to select the recording start time.7 Select the required hour value by pressing the or ❷ buttons.8 Press ❿ to select the minutes.9 Select the required minute value by pressing the or ❷ buttons.10 Press ❿ to select the recording stop time.11 Select the required recording stop time by pressing the or ❷buttons, following the same procedure as when selecting therecording start time.12 Press ❿ to select the recording speed.13 Press the or ❷ buttons to select the SP (Standard Play), LP(Long Play), AUTO (Auto Tape Speed Select) recording speeds.14 When you have finished, press the RETURN button.15 Press the STANDBY/ON button to activate the timer.Result: Before starting recording, the DVD-VCR compares thetimer duration with the remaining time on the cassette.➢ Auto Tape Speed Select. The DVD-VCR’s “Auto TapeSpeed Select” function compares the duration of the timerrecording to the actual recording time remaining on thetape loaded. If there is insufficient tape to complete atimer recording in AUTO mode, the DVD-VCRautomatically switches to LP mode to record the wholeprogramme.1/JAN TUE 12:09PR DAY START→STOP1 SA 9 12:00→12:50SP-- ---- --:--→--:------ ---- --:--→--:------ ---- --:--→--:------ ---- --:--→--:------ ---- --:--→--:----❷ ➛❿ SET:❿RETURN DELETE:CLEARSTANDBY/ONTVSTANDBY/ON15