GB23Selecting the RF OUT Sound Mode (K-B-M-G-I)Setting the DVD-VCR Output ChannelYour DVD-VCR output channel may need to be changed if thepictures suffer from interference or if your TV cannot find thepictures.Also, you can change the DVD-VCR output channel to adjust thefrequency in which information is displayed on the screen.1 Press MENU on the remote control.Result: The MAIN MENU is displayed.2 Press the corresponding , ❷ or ➛ , ❿ buttons to select theINSTALLATION option.3 Press the ENTER button to select this option.Result: The INSTALLATION menu is displayed.4 Press the or ❷ buttons, until the cursor is placed on the VCROUTPUT CH option.5 Select the required output channel (CH21~CH69) by pressing the➛ or ❿ buttons.6 On completion, press RETURN to exit the menu.Then tune your television again (see page 14).You can choose the sound mode (K/B , M/G or I) according to theTV set connected to your VCR.1 Press MENU on the remote control.Result: The MAIN MENU is displayed.2 Press the corresponding ,❷ or ➛, ❿ buttons to select theINSTALLATION option.3 Press the ENTER button to select this option.Result: The INSTALLATION menu is displayed.4 Press the or ❷ buttons, until the TV SYSTEM option isselected.5 Press the ➛ or ❿ button to select K, B, M, G or I.6 On completion, press RETURN to exit the menu.INSTALLATIONAUTO SET UPMANUAL SET UPTV SYSTEM :GVCR OUTPUT CH :CH36RETURN ➛❿ ❷MAIN MENUCH21CH36CH69INSTALLATIONRETURN ❷➛❿ ENTERVCRVCRMAIN MENUINSTALLATIONRETURN ❷➛❿ ENTERINSTALLATIONAUTO SET UPMANUAL SET UPTV SYSTEM :GVCR OUTPUT CH :CH36RETURN ❷➛❿KBMGI
